Muna amfani da na'ura mai latsawa ta KEDA 4208, tare da mitar Compressor na sau 7.3 a cikin min.The mold surface za a yi amfani a kan wannan inji, kuma yanzu mun riga da fiye da 400molds, tare da ƙarin salo a cikin haɓakawa.

 

 

Jikin tayal da injin KEDA ya danna za a sarrafa shi tare da hanyar bushewa;
Nufin share duk wani jigon da ke cikin tayal da ƙafe tururin ruwa a saman, don rage lahani.tiles tare da fasa ko glaze matsala.Zazzabi na bushewa kiln shine ≤200 ℃, kuma tsarin bushewa za a sarrafa ta ta matakai 2.

 

 

 

Injin buga tawada.Yawancin amfani da JINGTAO wanda hkamar yadda 8 ~ 12 tashoshi.

Bude hoton ƙira ɗaya, Injin buga Inkjet na iya buga sassan bazuwar bisa ga asaliƙira hoto, ko kuma yana iya gano wasu sassa don bugawa a saman tayal.

 

Kafin mu iya samar da 5800-6000㎡ don kiln.Yanzu fadada zuwa 12000㎡ tare da babban kiln.

 

OEM & ODM An Karɓa.

MOQ don OEM: Kwantena ɗaya don samfuran Buga ta Inkjet.

Bukatar OEM: Pls samar da asali zane samfurin inji mai kwakwalwa ko babban ƙuduri tsara hotuna domin mu gwada fitar da mafi dacewa kayayyakin a gare ku.Za mu tabbatar da cewa samfurin mu ya gamsu sosai, sannan mu fara samarwa da yawa.

 

MISALI: 300X600MM TILE BANGO AKA GWADA SHI CIKIN SANA'A 2: GLOSSY DA MATT

 

MISALI: 600X600MM TILE FOOL DON AIKI

 

SAURAN LOKACI DABAN A LOKACIN SIYASA

 

 

 

Hoton kwatancen dalla-dalla don sabbin samfura da waɗanda aka tsara na asali.